 |
|
|
|
|
| Mold Temperature (°F) |
140 |
| Stock Temperature (°F) |
490 |
| Nozzle Temperature (°F) |
490 |
| Front Zone Temperature (°F) |
480 |
| Middle Zone Temperature (°F) |
440 |
| Rear Zone Temperature (°F) |
430 |
| PSI Injection |
12M |
| Injection Speed |
Med |
| Screw RPM |
55 |
| Screw Back Pressure (PSI) |
100 |
| Clamp (Tons/Sq.In.) |
2-3 |
| Screw L/D |
18:1 |
| Screw Comp. Ratio |
2.5 |
| Specific Gravity |
1.22 |
| Regrind Percentage |
0.2 |
| Hydorscopic Non-Hydro |
HY |
| Drying Temperature (°F) |
190 |
| Drying Time (Hrs) |
2 |
| Good Properties / Typical Uses |
|
| Acronym |
Generic Names |
Common Trade Names |
| ABS |
Acrylonitrile, Butadiene, Styrene |
Cycolac, Lustram, Kralastic |
| AC |
Acetal |
Delrin, Celcon |
| PMMA |
Acrylic |
Lucite, Plexiglass |
| CA |
Cellulose, Acetate |
|
| CAB |
Cellulose, Acetate, Butyrate |
|
| CAP |
Cellulose, Acetate, Propionate |
|
| PPO |
Polyphenylene Oxide |
Noryl |
| PA 6/12 |
Nylon |
Zytel, Nylahl |
| PA 6/6 |
Nylon |
Zytel |
| PC |
Polycarbonate |
Lexan, Merlon, Polycarbafil |
| PBT |
Polyester Thermoplastic |
Valox |
| PET |
Polyester Thermoplastic |
Tenite |
| PE |
Polyethylene |
|
| PPS |
Polyphenylene Sulfide |
Ryton |
| PP |
Polypropylene |
|
| PSF |
Polysulfone |
|
| PS |
Polystyrene |
|
| SAN |
Styrene, Acrylonitrite |
|
| PU |
Polyurethane |
|
| PVC |
Vinyl |
|
| TPR |
Thermoplastic Rubber |
|
|
|
|
 |
 |